Roll Cage Design & Fabrication

 

Indicative Pricing

 
4 Point
Including main hoop with tags to B pillars, single diagonal brace and 2 rearward diagonal stays $1050


6 Point
As for 4 Point but including forward legs, A pillar tags, windscreen header and a diagonal roof bar $2035


Comprehensive 6 Point

As for 6 Point but including second diagonal to main hoop, as well as standard double diagonal side

intrusions (single bent side elements reinforced at centre) to both sides of vehicle

 $2950


Additional Bars
First (1 piece) diagonal side intrusion (both sides). $270
Second (2 piece) diagonal side intrusion (both sides). $485
Second diagonal to main hoop (2 piece) $210
Seatbelt bar to main hoop (2 pieces) with screw fittings $210
Seatbelt bar between rearward braces (1 piece) without screw fittings $95
Single diagonal between rearward stays $145
A pillar reinforcement bar (single piece) to floor ea $155

 

Pricing Assumes

 
  • Standard CAMS/FIA cage configurations provided with completed CAMS ROPS registration form.
  • Cages are fully TIG welded except for floor reinforcing plates which are MIG welded; bolted connections to be costed on a joint by joint basis.
  • All tubing is seamless Racetech 350 or similar (typical ultimate tensile strength 500-600Mpa). Main hoops and front legs are 44.45mm Dia. X 2.6mm wall thickness tube. All other members are 38.1mm Dia. X 2.6mm wall thickness tube. Floor reinforcements are 3mm plate.
  • Vehicles are internally stripped (no seats, carpets, headlining, or other interior trim) and that for 6 point cages the windscreen has been removed for A pillar tagging and reinforcement.
  • Cages are unpainted.
  • Chrome moly cages, engineering certification and homologation quoted separately.

 

All pricing is recommended retail including GST and is current at the date of publication. We reserve the right to change our pricing to accomodate price movements due to inflation and currency exchange movement.